ZHENGOU GroupZHENG'OU

Ứng dụng

Hóa chất & công nghiệp nặng

Tấn công của axit, kiềm và dung môi kết hợp sốc nhiệt. Vinyl ester và polyurethane ở nơi epoxy thường sẽ phồng rộp.

Sàn này phải chịu đựng những gì

Hiểu cơ chế hư hỏng trước khi chọn hệ thống.

  1. 01

    Acids, alkalis and solvents attack the floor daily — standard epoxy dissolves here.

  2. 02

    Thermal shock from hot processes and cold washdown works coatings loose from the slab.

  3. 03

    Spillage must not reach the concrete — or the ground beneath it.

  4. 04

    Mechanical damage — impacts, pallet edges, trolleys — opens paths for chemicals to attack.

Hóa chất & công nghiệp nặng

Hệ thống phủ được khuyến nghị

Chọn theo mức tải — không có hệ thống vạn năng, chỉ có hệ thống phù hợp.

01

Vinyl ester heavy-duty anti-corrosion system (fiberglass-reinforced)

Cấu trúc lớp
Vinyl ester primer → fiberglass mat lamination (layers as required) → vinyl ester mortar → vinyl ester topcoat

The fiberglass lamination bridges cracks and carries the chemical load — the standard answer for acid, alkali and solvent duty.

02

Transparent vinyl ester topcoat

Cấu trúc lớp
Existing anti-corrosion build, lightly abraded → transparent vinyl ester topcoat

Renews the chemical barrier of a sound system without stripping it — and keeps the substrate visible for inspection.

Trình tự thi công tiêu chuẩn

Cùng một sàn với cùng vật liệu có thể bền thêm nhiều năm nếu thi công cẩn thận. Sáu bước dưới đây là trình tự tiêu chuẩn của chúng tôi cho sàn epoxy: từng bước làm gì, theo tiêu chuẩn nào và chúng tôi nghiệm thu những gì. Với xưởng của bạn, chúng tôi điều chỉnh số lớp và độ dày theo tải trọng thực tế, hóa chất và khoảng thời gian dừng máy cho phép.

  1. 01

    Substrate preparation

    Grinding, repair and drying; the slab must be sound before any corrosion barrier goes on. Defects such as cracks and voids are located and marked one by one, and repaired before any corrosion work starts.

  2. 02

    Vinyl ester primer

    Primer bonds the system to the slab and is the first chemical barrier. Penetration is confirmed zone by zone; under-fed areas get an extra coat.

  3. 03

    Fiberglass lamination

    Fiberglass mat is wetted out layer by layer in vinyl ester — the reinforcement that bridges cracks. Mat overlaps are staggered as the system requires, with air worked out layer by layer.

  4. 04

    Mortar coat

    Vinyl ester mortar builds thickness and levels the reinforced surface. The mortar doubles as the second barrier; corners and pipe penetrations are thickened with a coved transition.

  5. 05

    Topcoat

    Vinyl ester topcoat seals the system into one continuous chemical barrier. After the topcoat, appearance and build are re-checked against the design before handover.

Ảnh tại công trường

Sàn hoàn thiện được chụp tại hiện trường — nhấp để phóng to và kiểm tra chi tiết.

Fiberglass build-up

Multi-layer fiberglass lamination mid-installation.

Topcoat application

Vinyl ester topcoat applied over large areas — the final chemical barrier taking shape.

Completed resin surface

The continuous resin surface before final inspection.

Dự án tiêu biểu

Một số dự án tiêu biểu do tập đoàn thực hiện.

  • Jiaxing Geno Electric anti-corrosion project

    Anti-corrosion coating for cable junction boxes and cable trays. Electrical equipment lives in damp, corrosive environments; vinyl-ester systems are applied layer by layer to steel components and junction boxes to lengthen maintenance intervals.

  • Kaide New Energy industrial base (Guangzhou)

    Abrasion-resistant flooring and anti-corrosion works, Lot 1. With a short build programme and overlapping trades at the new-energy base, works were organised as a flowing sequence so flooring and anti-corrosion were handed over together.

  • Wanhua Chemical

    A group framework cooperation newly awarded in 2025. Chemical plants concentrate flooring and anti-corrosion needs in workshops, tank farms and pipe racks; we recommend vinyl-ester or polyurethane systems zone by zone according to the chemicals present.

  • Shougang Group heavy-industrial sites

    Steel and heavy-industry buildings combine abrasion, heat and chemical exposure under one roof. We supply flooring materials to Shougang Group sites, selecting systems zone by zone according to the medium and load each area actually sees.

  • Minth Automotive Europe plant, Serbia

    A 2020 overseas supply project: we exported a complete vinyl ester package — resin, surface coating, fiberglass mats and cloth, corundum sand and application tools — from Shanghai to the buyer's plant in Loznica, Serbia. The floor was built as a fiberglass-reinforced vinyl ester system ("five cloth, seven coat") covering roughly 100,000 m².

Câu hỏi thường gặp

Những điều khách mua hỏi nhiều nhất khi chọn vật liệu phủ sàn.

Which chemicals can the system withstand?

The vinyl ester range is tested against acids, alkalis and solvents at defined concentrations — the results are published per product on the site. Send us your chemical list and we confirm the fit.

Tìm hiểu thêm
Why lay fiberglass cloth?

Concrete moves and cracks; the fiberglass lamination carries those movements and keeps the chemical barrier continuous above them.

Tìm hiểu thêm
Our plant has both acid and alkali zones — one system?

In many cases yes; where duty differs sharply, we vary the topcoat between zones while keeping one overall programme.

Tìm hiểu thêm
Can you renovate a failed anti-corrosion floor?

Yes — the assessment decides whether the sound layers stay and only the top is rebuilt, or the system is redone from the slab. Both keep the plant running zone by zone.

Tìm hiểu thêm

Hãy kể cho chúng tôi về sàn của bạn

Gửi lớp nền, diện tích và những gì sàn phải chịu đựng. Bạn sẽ nhận được hệ thống đề xuất, bản vẽ cấu trúc lớp và báo giá — thường trong vòng một ngày làm việc.

Yêu cầu báo giá