ZHENGOU GroupZHENG'OU

Ứng dụng

Điện tử & năng lượng mới

Xả tĩnh điện phá hủy sản phẩm và có thể gây hại cho con người. Hệ thống chống tĩnh điện với điện trở bề mặt kiểm soát, cộng khả năng chịu hóa chất khi đổ tràn dung dịch điện phân.

Sàn này phải chịu đựng những gì

Hiểu cơ chế hư hỏng trước khi chọn hệ thống.

  1. 01

    A single static discharge destroys components — and can ignite solvents. Surface resistance must be controlled and grounded.

  2. 02

    Electrolytes and process chemicals spill; the floor has to resist them, not just survive them.

  3. 03

    Cleanliness expectations are high: the floor should not shed dust and must be easy to wipe clean.

  4. 04

    Production lines keep running; upgrades and repairs have to fit short shutdown windows.

Điện tử & năng lượng mới

Hệ thống phủ được khuyến nghị

Chọn theo mức tải — không có hệ thống vạn năng, chỉ có hệ thống phù hợp.

02

Anti-static self-levelling system with epoxy mortar build

Cấu trúc lớp
Surface grinding → epoxy primer → epoxy mortar levelling (two passes) → epoxy filler → 2 m × 2 m copper foil grounding grid → anti-static intermediate coat → anti-static self-levelling topcoat
Độ dày thông thường
Typically 2 mm total; increased where the substrate is uneven or loads are heavier

For areas where flatness matters as much as static control: assembly zones, labs and warehouses in electronics plants. The epoxy mortar levels the slab first, the copper grid is laid in and bonded to the building earth, then the anti-static self-levelling topcoat goes down — seamless and dust-free. In areas with heavy foot or trolley traffic, a conductive polyurethane wear coat can be added.

Trình tự thi công tiêu chuẩn

Cùng một sàn với cùng vật liệu có thể bền thêm nhiều năm nếu thi công cẩn thận. Sáu bước dưới đây là trình tự tiêu chuẩn của chúng tôi cho sàn epoxy: từng bước làm gì, theo tiêu chuẩn nào và chúng tôi nghiệm thu những gì. Với xưởng của bạn, chúng tôi điều chỉnh số lớp và độ dày theo tải trọng thực tế, hóa chất và khoảng thời gian dừng máy cho phép.

  1. 01

    Substrate preparation

    Grinding and dust extraction to a sound, dry, level slab. Electronics plants demand tighter flatness than ordinary workshops; high spots found by straightedge are patched before coating.

  2. 02

    Primer

    Epoxy primer seals the slab and ensures the conductive system bonds to it. Sealing is confirmed on site against the slab's porosity to prevent blistering later.

  3. 03

    Conductive layer & grounding

    Conductive coating with a copper grid laid in, connected to the building earth — the backbone of the whole ESD system. Copper strip spacing follows the designed resistance target, and every joint is crimped solid.

  4. 04

    Filler coat

    Conductive filler closes pinholes without breaking the electrical path. Interlayer resistance is measured right after application so any anomaly is corrected while access is easy.

  5. 05

    Anti-static topcoat

    Anti-static self-levelling is poured and finished seamless. The surface is left to cure undisturbed in a clean, dust-free environment.

  6. 06

    Resistance testing & handover

    Surface resistance is measured point by point before handover, and documented. Test points are laid out on a grid across the whole area; the record is archived as the acceptance baseline.

Ảnh tại công trường

Sàn hoàn thiện được chụp tại hiện trường — nhấp để phóng to và kiểm tra chi tiết.

Electronics production hall

Anti-static self-levelling over a copper grounding grid, seamless from wall to wall.

SMT line area

Glossy anti-static surface that wipes clean and keeps dust away from the lines.

Battery plant floor

Anti-static system resistant to electrolyte spillage in the handling zones.

Dự án tiêu biểu

Một số dự án tiêu biểu do tập đoàn thực hiện.

  • CATL flooring framework

    A group framework cooperation newly awarded in 2025: supplying workshop flooring materials for CATL sites, delivered and applied in batches to match the build programme of its new-energy plants.

  • BYD workshop floor project

    Workshop flooring for BYD production bases. With intense logistics in new-energy workshops, floors are specified separately for heavy-traffic lanes and assembly areas, balancing wear resistance and flatness.

  • SVOLT (Great Wall Motor Beehive) project

    Floors for SVOLT (Great Wall Motor) power-battery plants, including visitor showcase areas. Battery workshops demand cleanliness and moisture control; floor systems are configured zone by zone to the workshop function.

  • OPPO Indonesia smart manufacturing center

    Flooring for the OPPO smart manufacturing centre in Indonesia. The overseas project was executed to local schedules and acceptance standards, with materials supplied directly from our domestic plants.

  • Haier Group manufacturing bases

    Home-appliance manufacturing leaves its own marks on a floor: constant pallet-truck traffic, heavy press lines and local wash-down zones. We supply flooring for Haier Group plants, choosing systems zone by zone according to the process.

  • China Mobile and State Grid facilities

    Telecom and power facilities — equipment rooms, substations and workshops — need floors that do not shed dust and stay easy to maintain, with anti-static options where equipment demands it. We supply flooring materials and application services to China Mobile and State Grid sites.

Câu hỏi thường gặp

Những điều khách mua hỏi nhiều nhất khi chọn vật liệu phủ sàn.

What surface resistance should the floor have?

It depends on your standard — electronics plants usually specify a controlled static-dissipative range, while explosive-storage areas need conductive values. Tell us the requirement and we build to it; the measured results are documented at handover.

Tìm hiểu thêm
Do we need our own grounding points?

The copper grid inside the floor must connect to the building earth. If your plant has grounding bars, we tie into them; otherwise the earth connection point needs to be arranged before we start.

Tìm hiểu thêm
Can anti-static and easy-clean go together?

Yes. The anti-static self-levelling topcoat is seamless and dense — dust has nowhere to settle and it wipes clean.

Tìm hiểu thêm
Will electrolyte spillage damage the floor?

The cured anti-static surface tolerates occasional spillage when cleaned up as part of normal operation; zones with frequent contact should be pointed out at design stage so we can reinforce them.

Tìm hiểu thêm
How do we verify the system after installation?

Surface resistance is measured point by point on the finished floor, and the readings are documented for your acceptance file. Our product test reports are available on each product page.

Tìm hiểu thêm

Hãy kể cho chúng tôi về sàn của bạn

Gửi lớp nền, diện tích và những gì sàn phải chịu đựng. Bạn sẽ nhận được hệ thống đề xuất, bản vẽ cấu trúc lớp và báo giá — thường trong vòng một ngày làm việc.

Yêu cầu báo giá