ZHENGOU GroupZHENG'OU

Ứng dụng

Logistics & chuỗi lạnh

Tải kệ nặng và chu kỳ đóng băng-tan băng lặp lại. Xử lý mạch nối quan trọng ngang với lớp phủ.

Sàn này phải chịu đựng những gì

Hiểu cơ chế hư hỏng trước khi chọn hệ thống.

  1. 01

    Racking leg loads concentrate in tiny footprints; the surface has to take them without dusting or cracking.

  2. 02

    Freeze-thaw cycles in cold-chain zones destroy coatings that were never chosen for low temperature.

  3. 03

    Expansion joints take the movement — if they fail, everything above them fails too.

  4. 04

    A warehouse cannot stop moving for a floor renovation.

Logistics & chuỗi lạnh

Hệ thống phủ được khuyến nghị

Chọn theo mức tải — không có hệ thống vạn năng, chỉ có hệ thống phù hợp.

01

Sealed & densified concrete floor

Cấu trúc lớp
Grinding → densifier penetration → progressive polishing to the desired finish

No coating to peel: the hardener reacts inside the slab, so heavy racking, dusting and freeze-thaw are handled at the material level. The workhorse for large warehouses.

Sản phẩm trong hệ thống này

Trình tự thi công tiêu chuẩn

Cùng một sàn với cùng vật liệu có thể bền thêm nhiều năm nếu thi công cẩn thận. Sáu bước dưới đây là trình tự tiêu chuẩn của chúng tôi cho sàn epoxy: từng bước làm gì, theo tiêu chuẩn nào và chúng tôi nghiệm thu những gì. Với xưởng của bạn, chúng tôi điều chỉnh số lớp và độ dày theo tải trọng thực tế, hóa chất và khoảng thời gian dừng máy cho phép.

  1. 01

    Assessment

    Slab condition, loads and temperature zones mapped before any recommendation. The survey covers racking leg pressures, forklift routes and cold-zone extents, and ends in a zoned plan drawing.

  2. 02

    Densifier route

    Grind open the surface, let the densifier react inside, then polish progressively. The slab is kept wet while the densifier reacts, then polished step by step to the target gloss.

  3. 03

    Coating route

    Primer, self-levelling and topcoat applied zone by zone while racking stays loaded. Aisles are closed in rotation, cleaned the same night and handed back next day, so the warehouse never stops.

  4. 04

    Joint detailing

    Movement joints repaired, filled or re-sealed so racking loads and traffic do not chew the edges. After repair, edges are protected along the traffic direction to extend joint life.

Ảnh tại công trường

Sàn hoàn thiện được chụp tại hiện trường — nhấp để phóng to và kiểm tra chi tiết.

Densified warehouse floor

Polished concrete holding up under racking and traffic without any coating to maintain.

Dock & picking lines

Coated, marked and washed — the working heart of the warehouse.

Cold-chain interface

Polyurethane finish at the temperature transition, selected for freeze-thaw duty.

Dự án tiêu biểu

Một số dự án tiêu biểu do tập đoàn thực hiện.

  • AGV-driven logistics floors, Zoomlion Yuanjiang

    100,000 m²

    At the Yuanjiang mixer-truck plant, AGVs handle material flow across 100,000 m². Because AGVs steer by floor flatness and guide lines, flatness was controlled as a specification of its own and the surface was line-marked to the logistics layout.

  • Heavy-duty logistics lanes, Zoomlion Changde

    200,000 m²

    In the 200,000 m² Changde construction-machinery plant, the busiest logistics lanes carry the heaviest loads. Those lanes were built with thickened screeds so the aisle floor does not rut or deform under repeated forklift traffic.

Câu hỏi thường gặp

Những điều khách mua hỏi nhiều nhất khi chọn vật liệu phủ sàn.

Coating or densifier for our warehouse?

Dry, unheated, big-footprint storage usually wins with densifier. If you need marking, washing or bright finish, coat those zones and densify the rest.

Tìm hiểu thêm
Will it survive the cold store?

Only if the system was selected for low temperature. Polyurethane systems and densified concrete tolerate freeze-thaw; standard epoxy does not belong there.

Tìm hiểu thêm
Can we renovate without emptying the racking?

Yes — work is zoned along the aisles, so only the aisle being worked is closed; racking stays loaded and picking continues elsewhere.

Tìm hiểu thêm
The joints keep breaking — can you fix that?

Joint detailing is part of the programme: repair, semi-rigid fill and edge protection so traffic stops chewing the arrises.

Tìm hiểu thêm

Hãy kể cho chúng tôi về sàn của bạn

Gửi lớp nền, diện tích và những gì sàn phải chịu đựng. Bạn sẽ nhận được hệ thống đề xuất, bản vẽ cấu trúc lớp và báo giá — thường trong vòng một ngày làm việc.

Yêu cầu báo giá