ZHENGOU GroupZHENG'OU

Ứng dụng

Phòng sạch dược phẩm

Liền mạch, không rơi bụi, chân tường cong và sạch được bằng chất tẩy mạnh. Rủi ro thực sự là trượt cuộc kiểm toán vệ sinh.

Sàn này phải chịu đựng những gì

Hiểu cơ chế hư hỏng trước khi chọn hệ thống.

  1. 01

    Audits are the real risk: the floor has to stay seamless, non-shedding and verifiable for years.

  2. 02

    Aggressive disinfectants are used on schedule; the surface must tolerate them without dulling or cracking.

  3. 03

    Coved skirting and closed corners are part of the system, not an afterthought.

  4. 04

    Renovation inside a running plant means dust and downtime must be engineered away.

Phòng sạch dược phẩm

Hệ thống phủ được khuyến nghị

Chọn theo mức tải — không có hệ thống vạn năng, chỉ có hệ thống phù hợp.

03

Epoxy self-levelling with ultra-abrasion polyurethane topcoat

Cấu trúc lớp
Epoxy primer → epoxy mortar/filler → solvent-free epoxy self-levelling topcoat → ultra-abrasion polyurethane topcoat
Độ dày thông thường
Typically 2–4 mm

For cleanroom zones where trolleys and pallet trucks run constantly and the floor wears faster: the polyurethane topcoat takes the abrasion, the epoxy base keeps the surface flat, seamless and easy to clean.

Trình tự thi công tiêu chuẩn

Cùng một sàn với cùng vật liệu có thể bền thêm nhiều năm nếu thi công cẩn thận. Sáu bước dưới đây là trình tự tiêu chuẩn của chúng tôi cho sàn epoxy: từng bước làm gì, theo tiêu chuẩn nào và chúng tôi nghiệm thu những gì. Với xưởng của bạn, chúng tôi điều chỉnh số lớp và độ dày theo tải trọng thực tế, hóa chất và khoảng thời gian dừng máy cho phép.

  1. 01

    Substrate & zoning plan

    Slab checked for strength and moisture; work zones planned so clean areas stay clean during the works. Buffer zones are set at cleanroom doorways, with personnel and materials flowing one way along the clean route.

  2. 02

    Primer and build-up

    Primer sealing, then mortar and filler coats to a perfectly flat base. Samples are retained from every batch and work records are filed room by room for audit.

  3. 03

    Self-levelling topcoat

    Solvent-free self-levelling poured and finished seamless across each room. Each room is poured in one continuous operation, leaving no construction joint.

  4. 04

    Coved skirting

    The floor turns up the wall as one piece, closing the corner that cleaning could never reach. The cove radius follows cleanroom practice, sealing tight against the wall coating.

  5. 05

    Topcoat and handover

    Optional polyurethane topcoat for high-frequency cleaning zones, then documented handover. The handover file includes batch numbers, application records and care instructions for the plant's audits.

Ảnh tại công trường

Sàn hoàn thiện được chụp tại hiện trường — nhấp để phóng to và kiểm tra chi tiết.

Cleanroom corridor

Seamless self-levelling through the corridor, coved into the walls.

Production suite

Green self-levelling under production equipment, easy to verify and easy to clean.

Packing zone

Light-traffic area finished with the same seamless standard.

Dự án tiêu biểu

Một số dự án tiêu biểu do tập đoàn thực hiện.

  • Shineway Pharmaceutical project

    Workshop flooring for Shineway Pharmaceutical. With steam cleaning and frequent washdowns in production areas, the floor uses a heat- and moisture-resistant, easy-clean system suited to pharmaceutical hygiene routines.

  • Pharmaceutical industry clients

    Workshop flooring products and application services for Huahai Pharmaceutical, Xinhua Pharmaceutical, Wanbang Pharma and more, covering API and formulation workshops with systems selected for cleanliness and chemical resistance.

  • Recognised clean-room and workshop flooring

    Our clean-room and workshop flooring work has been recognised by the Flooring Branch of the China Building Decoration Association as a demonstration project, and the group as a recommended brand. The same build-ups used in pharmaceutical workshops are behind those recognitions.

Câu hỏi thường gặp

Những điều khách mua hỏi nhiều nhất khi chọn vật liệu phủ sàn.

Will this floor pass a hygiene audit?

The system is designed for it: seamless surface, coved skirting, no hiding places for dirt, and a documented build-up. Final compliance always depends on your auditor and the rest of the room, but the floor side is audit-ready.

Tìm hiểu thêm
Which disinfectants can it take?

The cured surface tolerates scheduled cleaning with common disinfectants. For specific agents, tell us the chemical list at design stage and we select the topcoat accordingly.

Tìm hiểu thêm
Can you work in a plant that keeps running?

Yes — zoning, dust containment and low-odour solvent-free materials make phased renovation possible. Clean areas stay clean while we work elsewhere.

Tìm hiểu thêm
How long before the room can be used again?

Following the curing schedule — walkable the next day in normal conditions, with full cure completing over the first week. We hand over each room with its curing plan documented.

Tìm hiểu thêm
Our existing floor is failing — replace or renovate?

We assess the slab first: if the base is sound, the existing coating is ground off and a new seamless system applied without touching the structure.

Tìm hiểu thêm

Hãy kể cho chúng tôi về sàn của bạn

Gửi lớp nền, diện tích và những gì sàn phải chịu đựng. Bạn sẽ nhận được hệ thống đề xuất, bản vẽ cấu trúc lớp và báo giá — thường trong vòng một ngày làm việc.

Yêu cầu báo giá