ZHENGOU GroupZHENG'OU

Ứng dụng

Cải tạo sàn & nền cũ

Bụi bê tông, nền mài mòn và tiến độ sản xuất không thể dừng nhiều tuần. Chất làm cứng thấm và lớp lót xây dựng lại bề mặt mà không phải dừng nhà máy.

Sàn này phải chịu đựng những gì

Hiểu cơ chế hư hỏng trước khi chọn hệ thống.

  1. 01

    Dusting concrete coats products, machinery and air filters — and it gets worse every year.

  2. 02

    The schedule cannot stop for weeks — the floor has to come back between shifts.

  3. 03

    Old coatings, oils and contamination decide what the new system can bond to.

  4. 04

    Budgets differ per zone — one factory rarely needs one solution everywhere.

Cải tạo sàn & nền cũ

Hệ thống phủ được khuyến nghị

Chọn theo mức tải — không có hệ thống vạn năng, chỉ có hệ thống phù hợp.

01

Sealed & densified floor (no coating)

Cấu trúc lớp
Grind off the weak layer → densifier reacts inside the slab → progressive polish

For dusting, worn slabs that must return to service fast: nothing to peel, low cost per square metre, long service life.

Sản phẩm trong hệ thống này

Trình tự thi công tiêu chuẩn

Cùng một sàn với cùng vật liệu có thể bền thêm nhiều năm nếu thi công cẩn thận. Sáu bước dưới đây là trình tự tiêu chuẩn của chúng tôi cho sàn epoxy: từng bước làm gì, theo tiêu chuẩn nào và chúng tôi nghiệm thu những gì. Với xưởng của bạn, chúng tôi điều chỉnh số lớp và độ dày theo tải trọng thực tế, hóa chất và khoảng thời gian dừng máy cho phép.

  1. 01

    Substrate assessment

    Bond, contamination and moisture checks decide which renovation route is viable. The assessment decides between a resurfacing route and a full rebuild — pricing and schedule follow from it.

  2. 02

    Removal & repair

    Failed coatings and loose material ground off; cracks and holes repaired. After stripping, strength is re-tested; areas still short go deeper.

  3. 03

    Densifier route

    Penetration, reaction and progressive polishing bring the slab back harder than new. For dusting floors this route is preferred — no added film, the slab itself is hardened.

  4. 04

    Coating route

    Penetrating primer, build-up and a new topcoat matched to the zone duty. Renovation coatings lean on primer penetration; fast-absorbing areas take a double primer.

  5. 05

    Phased return to service

    Zones come back between shifts; production barely notices. Before each zone returns, a clean-down and protection briefing prevents cross-scratching.

Ảnh tại công trường

Sàn hoàn thiện được chụp tại hiện trường — nhấp để phóng to và kiểm tra chi tiết.

Densified old slab

A dusting floor brought back to a dense, polished surface.

Renovated working floor

New build-up over a sound slab — production never stopped.

Dự án tiêu biểu

Một số dự án tiêu biểu do tập đoàn thực hiện.

  • Automotive paint-shop renovation

    Renovating a live paint shop is a scheduling problem before it is a flooring one. For automotive clients including FAW, SAIC, Dongfeng, Beijing Benz, Geely, BYD, XPeng and NIO, we strip and re-lay floors zone by zone inside the owner's maintenance windows while the rest of the shop keeps producing.

  • Pharmaceutical workshop renewal without shutdown

    For clients such as Shineway Pharmaceutical, Huahai Pharmaceutical and Xinhua Pharmaceutical we have renewed workshop floors without stopping production: zoning, dust containment and low-odour solvent-free materials keep the clean areas clean while we work next door.

  • Residential garage refurbishment

    Older residential garages fail at the joints, the ramps and the oily bays first. On projects such as China Merchants' Cuican Mansion and the Xipai Jingyue development we renew traffic lanes and bays in phases, keeping half the garage usable throughout.

Câu hỏi thường gặp

Những điều khách mua hỏi nhiều nhất khi chọn vật liệu phủ sàn.

Our floor is dusting badly. Densifier or coating?

If you need a hard, dust-free concrete surface and speed, densify. If you need colour, chemical resistance or washability, coat it — often both routes combine zone by zone.

Tìm hiểu thêm
Can we avoid tearing out the old floor?

Usually yes. As long as the slab is structurally sound, the new system goes over it after grinding and repair — no demolition.

Tìm hiểu thêm
How fast can we get back to work?

Densified areas come back within days; coated zones follow the curing plan. Everything is phased so shifts keep running.

Tìm hiểu thêm
The old coating is still sticking in places — can it stay?

Possibly — adhesion testing decides. Sound, well-bonded areas can stay and be bridged; failing areas must go, or they will drag the new system down with them.

Tìm hiểu thêm

Hãy kể cho chúng tôi về sàn của bạn

Gửi lớp nền, diện tích và những gì sàn phải chịu đựng. Bạn sẽ nhận được hệ thống đề xuất, bản vẽ cấu trúc lớp và báo giá — thường trong vòng một ngày làm việc.

Yêu cầu báo giá